Sep
04
Experiences
Here Experiences required by various companies are posted for Electrical Engineers for reference purpose only. Please note that these are not vacancies.
1. Experiences
| Position | Qualification | Code | Experience Profile |
| Material Handling | Graduate / Post Graduate In Mechanical Engineering | Pw-MH | Design of Material Unloading, Handling & Storage, Transportation, Crushing, Specifically for Steel Plant & Power Plant Materials like Iron Ore, Limestone, Dolomite, Coal, Ash Handling System, Slag Handling etc. |
| Turbo Machinery | Graduate in Mechanical Engineering. Post graduation in Thermal/Hydro turbo machinery would be desirable. | Pw-TM | Design engineering of steam/gas turbines, large capacity air/gas compressors, hydro turbines and associated sub-systems in leading manufacturing firm. Familiarity with applicable Indian/International codes. Knowledge of detailed equipment design is preferred. |
| Power System Analysis | Graduate / Post Graduate In Electrical Engineering | Pw-PA | Power Flow studies, Short circuit studies, Protection settings & Relay co-ordination, Transient stability studies, Harmonic Analysis, Power quality issues and their mitigation, Insulation co-ordination, Ability to develop modules to simulate various control systems such as excitation system governing system etc, using tools like Matlab, Earthing system calculations etc |
| Substation Engineering | First Class Graduate In Electrical Engineering | Pw-SS | Preparation of 400 / 220 / 132 / 33 kV AIS / GIS layout, SLD, design calculations, cost estimates and procurement system of various sub-station equipment including EHV cables, vendor drawings review, inspection & expediting. |
| Control & Protection | First Class Graduate or Post Graduate In Electrical Engineering | Pw-CP | Preparation of BID, CWD, I/O list, I&C interfacing, TG, boiler related controls, controls related to various mechanical equipment, control & protection related to general EHV / HV / LV system, relay, setting, relay co-ordination study, SCADA & SAS etc. |
| Operation & Maintenance | First Class Graduate in Mechanical /Electrical Engineering | Pw-OM | Plant Manager/ Plant In-charge in a large power generation facility (coal / oil / gas fired conventional power plant or combined cycle gas turbine power plant) or in an O&M organization with experience in the operation, maintenance, performance evaluation, maintenance planning and O&M budgeting. Capable of handling general administration & O & M functions with an eye to meet contractual obligations. Conversant with relevant environmental norms safety & health requirements in work place & all statutory requirements of running the power plant. Experience in the preparation of O&M contracts and implementation thereof shall be an added advantage. |
| Commissioning | Graduate / Post Graduate in Mechanical /Electrical Engineering | Pw-CM | Working knowledge of commissioning activities in large thermal power plant and Industrial Plants including Plants commissioning, commissioning schedule planning, trouble shooting in power plant process and cycle equipment/systems, mechanical BOP equipment, electrical system/ equipment and instrument control. |
| Transmission & Distribution-Civil | Graduate / Post Graduate In Civil Engineering- Structural Engg Preferable | Pw-TD | Experience in civil/structural portion of high/extra high voltage substations and transmission lines, i.e., route selection, structure spotting, structure selection and sag tension calculations. and design of substation and transmission line structures including foundations. Well conversant with the use of construction methods and practices, testing and procedures and capability to review geotechnical reports. Ability to use Civil and Transmission Line design engineering software like STADD 3 Pro, PLS CADD etc. Preparation of bidding documents including Scope of Work and Technical Specifications. The candidate shall be capable of handling contract procurement and the associated activities; review and evaluation of bids, review of detailed designs and drawings submitted by contractors for high voltage/extra high voltage substation and transmission line projects/contracts. |
| Distribution System Automation | Graduate / Post Graduate In Electrical Engineering | Pw-DA | Experience in Consulting Engineering involved in design, project management and commissioning of control systems for a variety of applications in the Electrical Utilities. Feasibility study of the development of a network of distribution control centres and digital telecommunications infrastructure for the electrical utility, and in particular the development of the cost benefit analysis for Distribution Substations. Engineering and implementation of SCADA and SCS projects, including activities like preparation of specification and design review of SCADA systems, SCS and RTUs; Design and commissioning of substations control systems. Design of substation/Feeder automation schemes and interfaces; preparation and reviewing of contract and design specifications specifically for Distribution system. Preparation of tender documents including Scope of Work and Technical Specifications (SOW/TS) for lump sum turnkey (EPC) project contracts, preparation of detailed design drawings and review of design proposed by EPC contractors. |
| Boiler Design & Heat Recovery Equipment | Graduate In Mechanical Engineering /Thermal Sciences/Engineering is desirable | Pw-BH | Experience in thermal design of steam generators (Fluidized bed combustion / pulverized coal fired type) in leading steam generator manufacturing firm. The candidate shall have sound technical knowledge on heat transfer, fluid dynamics, combustion calculations, hydraulic design, two phase flow, metallurgy and materials and hands-on experience in sizing and disposition of various heat transfer surfaces viz. furnace, superheater / reheater, evaporator, circulation checks, performance calculations etc. Familiarity with Indian Boiler Regulations and other applicable Indian/International codes is a pre-requisite for this position. Exposure to site activities would be an added advantage. |
| Power Plant Cycle Equipment | Graduate / Post Graduate in Mechanical /Electrical Engineering | Pw-CE | Design & Engineering of large size power station having experience of power plant cycle equipment including turbine, boiler, their auxiliaries, rotating machines, mills, feeding system, high & low pressure piping, power plant control philosophy, layout engineering etc. |
.
2. Electrical Engineer – Design Hydro Power
Role purpose
This has created a pool of expertise which has created opening for additional electrical engineers. The principle function of this position is to work within a multidiscipline design team producing electrical designs for hydroelectric power (HEP) schemes.
The principal function of this positionmay be to taking a design from concept stage through to scheme design for procurement and perform site investigations. Work will involve liaising with the other members of the design team; approval to vendor design and drawings, coordination with contractors. It involves planning and design of electric circuitry, switchgear, transformers, transmission lines, instrumentation control and automation (ICA)
Essence of role – key accountabilities
Your priorities in this role will include:
- preparation of conceptual DPR (Detail Project report) stage design
- taking a design from concept stage through to scheme design for procurement
- preparation and submission of contract documents, technical specifications, design notes, reports and drawings for electro mechanical works
- detailed design for electrical circuitry, switchgear, transformers, transmission lines, instrumentation control and automation for HEP schemes
- approval to vendor design
- site inspection and commissioning support
- requirement to interface with both in-house and client design and project teams
Job requirements
Technical / professional expertise
The ideal candidate should possess an Electrical engineering degree and preferably a post graduation in electrical engineering or in instrumentation/control systems or equivalent; and be able to demonstrate the following skills and knowledge:
- good industry knowledge and contacts
- knowledge of engineering design of HV/LV power distribution and protection
- knowledge of Switchgear, Motor Control centres, standby diesel generation, UPS
- ability to design cabling
- lightning protection, earthing and bonding, discrimination studies
- knowledge of Amtech design software
Company may offer
- a commitment to your personal and professional development
- a package that recognises and rewards success
- an environment that encourages a healthy work life balance with flexible working conditions
3. Substation Engineering Design – Switchyard Layout & Elevation
The scope of Substation/ Switchyard engineering design services are following:-
1. Preparation of drawings:
a. Single Line Diagram
b. Switchyard General Layout
c. Substation General Layout
d. Switchyard Elevation and Typical Sections
e. Substation Foundation and Cable Trench Layouts
f. Substation Lightning Shielding Mast
g. Switchyard Rigid Bus and Cable Jumper Assembly Details
h. Substation Earthing Layout
i. Substation Earthing Details
j. Substation Cable Layout
k. Substation Cable Block Diagrams
l. Substation Cable Schedules
m. Substation Connector List
n. Substation Connector Layouts
2. Design Calculations for Substation:
a. Substation Earthing System Design Calculations
b. Substation Rigid Bus and Strain Bus Design Calculations
c. Substation Lightning Shielding System Design Calculations
d. Substation LVAC and LVDC Station Service System Design Calculation
e. Current Transformer Design Calculations
f. Capacitive Voltage Transformer Design Calculation
g. Battery and Charger Sizing Design Calculations
3. Manufacturer’s Shop Drawing to be checked:
a. Power Transformers
b. Circuit Breakers
c. Disconnect Switches and Earth Switches
d. Instrument Transformers
e. Surge Arresters
f. Low Voltage AC and DC
g. Earthing Transformers and Tertiary Equipment
h. Solid Core Post Insulators and Disc Insulators
i. Auxiliary Power and Control Cables
j. Connectors
4. Coordination on following engineering drawings:
a. Civil drawings
b. Substation Disturbance Recording System Drawings
c. Switchyard Steel Support Structures Drawings and Structural Design Calculations.
4. Engineering Design – Protection & Control Schematics
Engineering Design – Protection & Control Schematics
There are wide range of design needs, from protection scheme definition and relay selection, through coordination studies and relay settings, substation control & engineering design, to plant maintenance and safety aspects.
Generally, the scope of engineering design services for protection and control comprises the following:-
1. Preparation of drawings:
a. General Drawings
b. Overview Diagram
c. Block Diagram – Station Level
d. Block Diagram – Bay Level
e. Logic Function Diagram
f. Panel Drawings
g. Parameter Lists
h. Station Level Schematics
i. Bay Level Schematics
j. Cable Block Diagram
k. Interconnection Table
2. Protection Scheme Design & Philosophy
Engineers has be provide complete design of protection scheme, whether anyone is looking for a single line-terminal upgrade, or complete primary and backup protection for a new installation.
Evaluate and select the protective relays
Define the AC and DC inputs and outputs
Prepare system single-lines, three-lines, and DC schematics
Create wiring diagrams and construction prints.
3. Protective Relay Setting Calculation
Calculations of protection settings for the following protection applications are covered.
i. Transmission Line Protection
Line protection using time-stepped or communications-aided schemes
Permissive Over Reaching Transfer Trip
Permissive Under Reach Transfer Trip
Directional Comparison Blocking/Unblocking
Line Current Differential
Busbar protection
Automatic reclosing
ii. Distribution Substation Protection
Feeder Overcurrent Protection
Feeder Unit Protection
Automatic reclosing
Transformer protection
iii. Motor and Generator Protection
Induction Motor Thermal/Over-current Protection
Synchronous Generator Protection
5. Sr. Engg. (Control System Engg.) 3 – 6 yrs)
Key Skill : Design & Engineering – Control Logics, Mimics
Specialization:
Design, Electrical/Electronic, Industrial/Utility
Engg. project Mgmt./site Engg./Civil Engg.
Industry:
Engineering/Projects, Projects/Infrastructure/Power/Energy
School & Graduation -
BE/B.Tech (Electrical, Electronics/Telecommunication, Instrumentation )
Level:
Middle – Manager, Assistant Manager
3 – 6 yrs.
These lead engineers should have 3 to 7 years of experience in Control System (DCS/PLC) Design/Engineering/Application on power projects/process industry applications. They should be able to take lead, supervise jobs & guide project Engineers with Control Logic & Graphics development.
Position Control System Engineers
Area of Operation Power Generation
Job Profile Required Electrical / Electronics / Instrumentation engineer with 2-8 years of experience in Project Management, Engineering, Commissioning of Distributed Control Systems for various utility (large) power plants, captive (small, medium) powerplants for power projects in and outside India.
Qualifications B.E in Electrical / Electronics / Instrumentation stream
Experience Incumbent should possess sound knowledge
• Industry norms and standards, field instrumentation & devices and standard control strategies.
• reading and interpreting P&ID, SAMA drawings, control narratives
The selected candidates will be responsible for the complete design / testing / commissioning / service activities for various systems in a power plant based on standard and proven Siemens control philosophies / design inputs from consultants etc.
Other Requirements Knowledge of Other Control Systems shall be an added advantage. Use of standard tools like MS Access, MS Excel and MS Projects is a prerequisite.
Good communication skills, analytical thinking and ability to work under project deadlines are some of the other desired qualities.
Area of Operation Power Generation
Job Profile Required Electrical / Electronics / Instrumentation engineer with 2-8 years of experience in Project Management, Engineering, Commissioning of Distributed Control Systems for various utility (large) power plants, captive (small, medium) powerplants for power projects in and outside India.
Qualifications B.E in Electrical / Electronics / Instrumentation stream
Experience Incumbent should possess sound knowledge
• Industry norms and standards, field instrumentation & devices and standard control strategies.
• reading and interpreting P&ID, SAMA drawings, control narratives
The candidates will be responsible for the complete design / testing / commissioning / service activities for various systems in a power plant based on standard and proven Siemens control philosophies / design inputs from consultants etc.
Other Requirements Knowledge of Other Control Systems shall be an added advantage. Use of standard tools like MS Access, MS Excel and MS Projects is a prerequisite.
Good communication skills, analytical thinking and ability to work under project deadlines are some of the other desired qualities.
Electrical EngineerExperience in basic and detailed engineering of electrical equipment and systems, Single Line Diagrams, Relay & Metering diagram, design calculations and estimation of bulk materials, vendor drawing review of all major equipment and systems, layout engineering, grounding and lightning protection system, lighting system, cathodic protection system, cable schedule and interconnection diagrams, engineering of EHV Substation/ GIS, power system studies including load flow, short circuits, transient stability, calculation of electromagnetic transients, harmonic analysis, voltage drop, relay co-ordination etc.
8. Control & Instrumentation Engineer (L&T)
Control and Instrumentation Engineer
Basic and detailed engineering of control and instrumentation systems including DCS, field instrument and I/O list, logics/ control loop diagrams, graphics, control philosophy, flow element/ control valve sizing, control room layout, Instrumentation drawings, cable schedule and interconnection diagrams, etc.
9.
| Electrical Design Engineer | |
| Electrical | |
| Perform electrical engineering related design inputs for a range of water and wastewater projects, including treatment works, pumping stations and package plant. | |
| The job responsibilities will include but may not be limited to any or all of the following:
Preparation of single line diagrams, electrical schedules, equipment lists, up to and including construction issue. Prepare electrical design package and data sheets for procurement. Raising and resolution of technical queries. Attend internal and external technical meetings with key stakeholders. Communicate and coordinate designs with other disciplines Validate sub-contractor design: Contribute to the development of key reports including the Preliminary Design (Study) Report, the Outline Design Report and the Detailed Design Report. Contribute to the development of supporting documentation, in accordance with the Project Delivery Process. Brief and supervise CAD technicians. Understands and implements the Quality, Safety and Environmental Policies and Targets. Aware of the need to satisfy customer requirements with the aim of enhancing the customers’ perception and satisfaction. Supervise and develop Junior Electrical Design Engineers. |
|
| The successful candidate must have water and wastewater experience plus:
- Effective communication skills with ability to engage project stakeholders (construction staff, supply chain representatives and client operations). |